Hey everyone. I just purchased an 08 Wolverine 450 4x4 today. I have been looking around the internet for a rear accessory rack that does not extend too far over the rear. I am a bigtime hunter but wanted a sport quad with 4wd capability. I need a rack capable of holding a shotgun or a bow and strong enough to hold at last 120lbs. Everything I have found extends wayyy too far over the rear of the bike. Does anyone know of a company or site that deals in these? Any help would be greatly appreciated.
Thanks
Ryan

 

bump.. nobody has any idea about this?

 

Im not sure if you have already seen this one, but heres a new rear rack for a wolvey 06-09 on ebay.

http://cgi.ebay.com/ebaymotors...Q5fPartsQ5fAccessories

 

that rack is for an older 350.....i have the cmp one for my 450 and hated it...like you said hangs way off the back,and it broke......my 2 cents is make one or have one made.....

 

Not sure but does the 450 Wolverine not use the exsact same frame as the 350 Briun/Grizzly or 450 Grizzly? If so then there rear rack should bolt on with not to many mods,just a matter of putting holes in your rear plastic.

 

Look at my pictures. I made one from the factory grab bar,square stock and the rack is from a 04 Kodiak. Works great!!!!

 

<div class="FTQUOTE"><begin quote>Originally posted by: Wolvy450

Look at my pictures. I made one from the factory grab bar,square stock and the rack is from a 04 Kodiak. Works great!!!!</end quote></div>

i like this idea. can you send me a picture of the rack looking up from the bottom? I am interested as to how you mounted this. I would like the rack to not hang off the back so far and have a cutout around the rear of the seat so I can put a bag on the back.

 

was able to get a bag on the back without using a rear rack. I also added on hand guards in the process.

 

i made one myself and holds me fine at 240 lbs let me find the pic