Need a Bolt to lock my motor at TDC
Jan 1, 2009 | 10:47 PM
#1
Thread Starter
|
Pro Rider
Joined: Apr 2003
Posts: 1,574
Likes: 0
From: East Brunswick, New Jersey
Need a Bolt to lock my motor at TDC
I am waiting on some misc items to bolt up my head on my motor. I used to have a locking TDC bolt but I cant' seem to find it. I tried ordering one from RWR but they no longer carry them. Anyone has made any? Hopefully within a week I can put this motor in the frame.
Jan 2, 2009 | 12:25 AM
#2
Pro Rider
Joined: Jun 2002
Posts: 908
Likes: 0
Need a Bolt to lock my motor at TDC
What you need is a M8x1.25 bolt about 40-50mm
(M8 = 8mm diameter bolt, 1.25 = thread pitch)
Also buy a nut to fit the bolt.
1.Thread nut onto bolt
2. Grind about a 1/4" off the end of the bolt as shown in the picture
3. Remove the nut, this will clean up the threads
PICTURE
(M8 = 8mm diameter bolt, 1.25 = thread pitch)
Also buy a nut to fit the bolt.
1.Thread nut onto bolt
2. Grind about a 1/4" off the end of the bolt as shown in the picture
3. Remove the nut, this will clean up the threads
PICTURE
Jan 2, 2009 | 08:51 AM
#4
Thread Starter
|
Pro Rider
Joined: Apr 2003
Posts: 1,574
Likes: 0
From: East Brunswick, New Jersey
Need a Bolt to lock my motor at TDC
Thanks guys. Going to pick one up today just waiting on the misc parts to put this motor together. Maybe it will come in the mail today.
Thread
Thread Starter
Forum
Replies
Last Post
skeets44
Kids Quads & Other ATV's - Ask an Expert!
0
Jul 17, 2015 01:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)