Hi, this is a pretty cool trick if you need to get the magneto off of a 200x and don't have a puller. Take out the bolt that holds the magneto on and then take out the swing arm bolt and the threads are the exact same, thread the swing arm bolt in and tighten it until the magneto pops off. pretty cool. We did this on a '84 so I'm pretty sure '83-'85's will work, not sure about '86 and '87's.

'85 200x
'86 350x
2 '85 350x frames

 

thankz for sharing that.....there is a 200x in my area i was interested in

i will keep that in mind!