How big can I go with the stock cylinder? How much does a 333 kit cost? What is involved with the 333 kit? Whould I need to change anything else?

Thankx


------------------
Y2K300EX

'00 Honda 300EX

 

Go to this site. Its the mods for the 300ex from a dirt wheels article it tells you all you'd have to do!!

http://www.idsi.net/~toonster/kewlman/300ex.htm

 

Thankx

------------------
Y2K300EX

'00 Honda 300EX

 

A most excellent article.

The one thing I would point out is that getting the air box opened up goes hand in hand with the pipe.

Those three things are all bolt on and you never have to touch the internals of the engine.

Air flow intake, open the air box and use the K&N, flow, the larger duct of the 350X, available at your honda dealer for $15, and exhaust.

 

TOPCAT, the 350x tube you're talking about.It's the one between the airbox and carb right? I called my favorite honda dealer yesterday and the guy said he found two tubes of some sort.One he said was 15 bucks and the other was 40 $$.I'll probably go there saturday morning to look at the microfiche.
Do you know the stock main jet size on the 300 ex?

Thanks,
scott

 

I'd also like to know which tube it is I had the same prob when I called the dealer.

Any help would be great thanks!

 

I looked at the honda microfische acouple weeks ago and the carb intake tube from air box is 45 bucks.I wish i knew where to get one for 15. scott'

 

I looked at my air tube for my 2000 300ex. There is a small tube running to a clearish plastic container thing. I noticed my friend who has a 97 doesn't have this little tube. Please help me figure out what it is.

------------------
Y2K300EX

2000 Honda 300EX

1988 Quadsport 230