Well my Carb to airbox rubber boot is ripped so i want to replace it but just cant seem to want to pay the $45 for a simple boot. Anyone have an extras laying around or anything or know where to find a used one? Ive looked at the trusty ebay but came up empty. Any info will help.

 

let me look in my spare parts box tomorrow..i *might* just have one

 

well i looked and cant find one. thought i had it attached to an air box but that is gone too!. sorry

 

Well thanks for looking at least. For now i just tried to glue it up with rubber cement and im letting it dry so well see how that works

 

if it doesnt try some "gorilla" brand duct tape. that stuff sticks to anything and it will remain flexible. just a thought

 

I JUST had the same problem. Literally. I have 3 Banshees and used an intake boot from one of the Banshee stock carbs to the stock air box that I took off. Fit good. Let me see if I have another one laying around.

 

If no luck with the factory boots, Napa has a great selection of large HD rubber hose. I just used a short straight section from carb to air box & it works great. Probably 2 1/4" ID if I remember right. ----Proflow