Can-Am DS 450 Modification Arrives
Nov 4, 2010 | 04:29 PM
#1
Thread Starter
|
ATV Reporter
Joined: Nov 2010
Posts: 286
Likes: 0
Can-Am DS 450 Modification Arrives
Hey guys,
We got a brand new article up on the website. Here's a little snippet to tide you over:
To read the full article, click here!
Excited or bored by this new mod? Discuss!
We got a brand new article up on the website. Here's a little snippet to tide you over:
Originally Posted by ATVConnection
Can-Am DS 450 fans have cause for celebration as a new performance modification is about to be unleashed for the power hungry. In developing the largest stroker crank for the Can-AM DS 450 ATV, Falicon Crankshafts Components partnered with Eric Oldham at Oldham Machine Works (OMW). Together they pushed the envelope by stroking the OEM crankshaft + 8mm (68.8mm overall stroke), balanced to a 14:1 high compression stroker piston.
Excited or bored by this new mod? Discuss!
Nov 5, 2010 | 07:10 PM
#4
Pro Rider
SilverBomb has got an Addiction!
SilverBomb has got an Addiction!
Joined: Jul 2007
Posts: 884
Likes: 0
From: Payson, Utah
There are dyno charts listed on Falicon's website. Very Impressive, I've never seen a DS450 hit over 60 hp before this and they say there's a lot left.
Nov 16, 2010 | 06:45 PM
#7
Pro Rider - Oldham Racing
BUILDS THE FASTEST DS's ON THE PLANET!
Want a hot DS, or maybe one of the fastest DS's on the planet? This is the man to contact!
BUILDS THE FASTEST DS's ON THE PLANET!
Want a hot DS, or maybe one of the fastest DS's on the planet? This is the man to contact!
Joined: Jun 2003
Posts: 553
Likes: 0
I pulled the 450 apart and studied it for quite some time before developing this kit. Its a well designed motor but is begging for extra cc's. The factory port is very nice but I was able to improve on it quite a bit judging from the dyno results. The exhaust cam is pretty good so I only changed the intake cam for this build.
Here are some prices:
8mill Falicon stroker with knife rod $1100
stroker piston $300
billet intake cam $345
beehive spring kit with titanium retainers $225
stage 1 porting $600
These items can be purchased seperately. You do not have to buy the entire kit but this combo is what added 17hp over stock.
MrHorsepower
Here are some prices:
8mill Falicon stroker with knife rod $1100
stroker piston $300
billet intake cam $345
beehive spring kit with titanium retainers $225
stage 1 porting $600
These items can be purchased seperately. You do not have to buy the entire kit but this combo is what added 17hp over stock.
MrHorsepower
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
General RUV / UTV Discussion
6
Mar 22, 2016 09:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)