Hey all . I have a 2007 wilderness 250 . It was giving me problems at 3/4 throttle so i took off the carb and cleaned it . My question is what are the specs for the needle jet setting, idle and air screws? This has model has an auto choke. cant seem to get the atv started now. Cant seem to find this anywhere.

thx, Mike

 

Mine is out just over 3.5 on the main and 2 on the idle. Then just adjust the idle rpm to where you want it. The float height seemed to be what always gave me the most trouble adjusting back when mine was running. If you could, could you either take a picture of the plug that goes into the cdi or just tell me what color wires go where as my plug broke and now I can't figure out what color wires go where on the CDI. If you get a pic email it to rcpilkt4@gmail.com please. If you got anymore questions on your carb let me know.
Thanks,
Cole