Hey guys, first thanks for all the help. I'm new and not sure if this is the right place, but here goes. Long story short. Bought a 110cc Loncin Go-kart dog had chewed wires. Got it running by basically rewiring cdi, coil, & stator. 'My engine has two sets of wires coming out, one from stator area (no problem there got it running) and another from above the sprocket gear has 5 wires here are the colors. What are these wires for?

red w/ white stripe
dark green w/ black stripe
pink
light green w/ red stripe
blue w/ red stripe

if got a pictures but i can't figure out how to attached it, sorry. Thanks again!

 

Those are the gear indicator wires. Light green with red stripe should be neutral. Each one is grounded when it's in a particular gear.

 

Ahh... That makes sense, there is a digital display on the dash. That will show what gear it's in. Great help, thanks.