4 Zinger carb issues
Apr 25, 2016 | 11:16 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Apr 2016
Posts: 1
Likes: 0
4 Zinger carb issues
I recently purchased a Yamaha 4 Zinger, 86 i think. It was difficult to start so I replaced the carb and put in a new spark plug in. It still doesn't want to start. If i give it full choke and place my hand over the carb i can get it to start and idle as long as my hand is covering the carb. I checked the compression and i have 90 PSI with one full pull and 120 on the second pull. When i pull the plug after trying to start without my hand on the carb it is dry so i don't think i'm getting fuel. Any ideas would be appreciated.
Apr 26, 2016 | 08:13 AM
#2
Pro Rider
Joined: Jan 2016
Posts: 591
Likes: 0
From: Whitesburg, TN
I recently purchased a Yamaha 4 Zinger, 86 i think. It was difficult to start so I replaced the carb and put in a new spark plug in. It still doesn't want to start. If i give it full choke and place my hand over the carb i can get it to start and idle as long as my hand is covering the carb. I checked the compression and i have 90 PSI with one full pull and 120 on the second pull. When i pull the plug after trying to start without my hand on the carb it is dry so i don't think i'm getting fuel. Any ideas would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
reezy
Polaris
16
Feb 21, 2016 06:31 PM
amalota
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
Feb 5, 2016 01:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)