I have a 110 coolster that will not start. It used to be very consistant in starting everytime but rather quickly decided to start at all. I have cleaned the carb, replaced the carb with a brand new one, attempted to (mechanically limited) clean the spark plug but unsuccessful so far. I noticed 1 brown wire from the kill switch on the left handlebar had been disconnected (see pictures). I attempted to connect it and thought It was atleast making contact as needed but didnt seem to make a difference when trying to start the atv. Not ruling this out as a culprit but wanting to provide that info upfront. I have a video and some pictures that I hope can fill the gaps and make up for my lack of proper mechanical terms. I just need a place to start troubleshooting and gladly appreciate any help I can get. I will be around all weekend to try whatever is needed.
Thanks in Advance.


kill switch wire far away




kill switch wire closer




kill switch wire close up


below is a video of it trying to start.