Loncin 110 engine runs great but quit moving
Feb 25, 2017 | 02:07 PM
#1
Thread Starter
|
Trailblazer
Joined: Mar 2003
Posts: 54
Likes: 0
Loncin 110 engine runs great but quit moving
Was pulling good when (auto,cvt,clutch) or whatever drive it has started selling like something burning and start slipping, now it want move
on level ground. No smoking just burning smell, the only adj I could find on the forums said to loose the lock nut and turn screw on right side motor case ccw, this didn't help, dosent seem to do anything. This atv is full auto, no reverse, some say these only have clutch and single speed and no cvt?
on level ground. No smoking just burning smell, the only adj I could find on the forums said to loose the lock nut and turn screw on right side motor case ccw, this didn't help, dosent seem to do anything. This atv is full auto, no reverse, some say these only have clutch and single speed and no cvt?
Feb 25, 2017 | 04:22 PM
#2
Polaris ATV Expert
Retired and loving it!
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
If it's like this one,probably clutch plates are toast. Don't know if this is what you have,but if is,this video may help plus parts on ebay.
110cc Clutch: Parts & Accessories | eBay