Yamaha Discussions about Yamaha ATVs.

91 warrior 350 not firing

Thread Tools
 
Search this Thread
 
Old Mar 27, 2017 | 05:06 PM
  #1  
Jlebouef's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default 91 warrior 350 not firing

I bought this the way it is guy said he took the fenders off to paint at this point it still ran he put everything back on it and was not getting any fire i got it put new cdi coil stator and solenoid on it and changed the kill switch and it still not firing any help on this please
 
Reply
Old Mar 30, 2017 | 03:12 PM
  #2  
Warrior35's Avatar
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

the battery could be dead. is the spark plug getting spark? jets could be clogged up. could not be getting gas those are the main things you should check before you start buying new things
 
Reply
Old Mar 30, 2017 | 04:27 PM
  #3  
Jlebouef's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

The battery is good and no it is not getting fire to the plug but it is turning over
 
Reply
Old Mar 30, 2017 | 10:45 PM
  #4  
Warrior35's Avatar
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

Get a new spark plug then try it
 
Reply
Old Mar 31, 2017 | 03:20 AM
  #5  
Jlebouef's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

Already has a new one
 
Reply
Old Mar 31, 2017 | 07:54 AM
  #6  
Warrior35's Avatar
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

hmmm weird try taking off the spark plug cap and make sure nothing is in it and make sure its getting a good conection and the spark plug is tight
 
Reply
Old Mar 31, 2017 | 11:58 AM
  #7  
Jlebouef's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

For some reason it is not getting fire to the coil
 
Reply
Old Apr 1, 2017 | 08:46 PM
  #8  
Jlebouef's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 9
Likes: 0
Default

ok I done some testing the stator has power the cdi has power the orange wire to the coil does not always have fire I used my multimeter and when I touch the wire it goes to -2 or 3 then I push the start button and it goes just about to +20 I stop wait a minute and test it again and it shows 0.00 the whole time even when pushing the start button
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:38 PM.