Hello, I've got a ranger 6x6 and the inner clutch cover is trashed. I can't find anything for this machine but the big boss 6x6 cover looks almost identical from pics even though it has a few more tabs for the outer cover to bolt to. That is not an issue, the issue is the 3 bolts that attach the inner cover to the transmission. I was going to put a sportsman cover on it but 1 of the bolt holes was less than a quarter inch away from where it needed to be to line up to the threaded hole in the tranny. I was wondering if anybody knows for sure that these will interchange or had a big boss 6x6 inner cover laying around they could take a measurement off of for me.

 

You could search Polaris Parts to find the right part number then search that part number to see what else uses it. Besides that site, most parts dealers, Amazon and ebay sellers have a list of models that anything they sell fits. http://parts.polarisind.com/browse/Browse.asp

 

This was a last resort because I've done all that and the parts diagrams are wrong. I did find the part though.