Raptor Stock Air Screw Setting on the Carbs??
Apr 22, 2003 | 07:22 PM
#1
Thread Starter
|
Range Rover
Joined: Jun 2002
Posts: 169
Likes: 0
Raptor Stock Air Screw Setting on the Carbs??
How many turns out is the stock air screw setting? I'm putting my stock muffler back on with stock jets and need to readjust the carb air screws. Thanks!!!
Apr 22, 2003 | 08:16 PM
#3
Thread Starter
|
Range Rover
Joined: Jun 2002
Posts: 169
Likes: 0
Raptor Stock Air Screw Setting on the Carbs??
Yeah I know. Stock is evil.....
I currently have it set at 3 on both carbs and it ran good before. But now with the stock (there's that word again) muffler, it backfires a bit when revving and letting off the throttle. Just put the left carb at 2.5 to clear that up?
I currently have it set at 3 on both carbs and it ran good before. But now with the stock (there's that word again) muffler, it backfires a bit when revving and letting off the throttle. Just put the left carb at 2.5 to clear that up?
Thread
Thread Starter
Forum
Replies
Last Post
bzdok1234
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
30
Feb 23, 2016 01:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)