mudblaster
#1
Sorry to bug you again.
I put the tach on the bike and noticed it idles about 1600 rpm. Is this correct? What does yours idle at?
I remember you said that if you wrap the wire too much, the bike may miss, but I was wondering if the wire would cause the bike to idle too high. I wrapped the wire 4 times. Thanks again!
I put the tach on the bike and noticed it idles about 1600 rpm. Is this correct? What does yours idle at?
I remember you said that if you wrap the wire too much, the bike may miss, but I was wondering if the wire would cause the bike to idle too high. I wrapped the wire 4 times. Thanks again!
#2
im going rideing tonight i'll let you know.when its cold it idles around 1350 and starts to go up as it gets warm. but ill keep an eye on it and when i get home tonight i'll let you know what it runs at hot.
#3
hi again. i went out lastnight and i checked out the idle when it was warm and mine idles around 1600 rpms also, so i got out my owners manul and on page 132 it says it should idle at 1250 to 1350 hot. i thought it idled a little fast but it dosent move when i put it into gear so i thought it was ok. plus i had it to the dealer about a month ago to have the valves ajusted and he said the idle was good. but i think i will turn it down a little and see how it is then. Thanks for the question it made me take a closer look at the bike.[img]i/expressions/face-icon-small-smile.gif[/img]
#4
Mudblaster,
Mine was idleing at about 1600 too and I also took a look at the manual. Mine said the same thing too so I turned mine down to about 1350 also. Shouldn't hurt anyhting, shoud it? Thanks for the help!
Mine was idleing at about 1600 too and I also took a look at the manual. Mine said the same thing too so I turned mine down to about 1350 also. Shouldn't hurt anyhting, shoud it? Thanks for the help!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



