Well dammit... Its clicking already. Doesnt do it all the time, not really when turning, going strait as well. I didnt notice the angle on the cvs change that much. Could be cvs? Could be bearings? Should i do a cv rebuild? There is a thread down below if you want to see the tires. "New Tires". No lift (its solid axle)

 

dont really understand what you are saying is clicking.

What is it again that is clicking

 

WEll hmm... Something in the front end... Ive never heard it before. Sounds like what a cv sounds like when it clicks. But it doesnt do it all the time. Its not real loud.

 

break your A arms down and slide your axel out of the diff, and remove your hub nut. You may have something dragging in it.
Aslo while it is tore down go ahead and dip your bolts that hold your A arms and hub in place in to some good thick bearing grease to greas up your bushings.

 

Thanks CK, one more Q for anyone that will answer. Whats the average amount of grease to pack the cv boots with? And what Type...

 

As Far as density of the grease i couldnt tell ya, but a quick call to the shop will be able to. As far as amount you dont want it slammed packed full but you nee to pack your hub bearing full and throw a few goobs into the boot . This is where you bearings and such gets it extra grease if needed.

Hold on a sec i think i have something for ya

http://photos.yahoo.com/bc/fangoelga...o.com/&.view=t

This is from Fango hope he doesnt mind. Click on CV boot

 

Thanks Ck (again) looks like I found the issue. Ball joints have uhh like 1/4~1/2in play... That would explain the random clicking and not constant like a CV may.

So looks like im grounded until i get this fixed...

 

Naw, I don't mind sharing pics with the likes of "all y'all" here on the Connection!!![img]i/expressions/face-icon-small-cool.gif[/img]

 

Just sent you a PM fango...

 

yea my 250 4x4 was making the same noise he descibed, is it somthing i need to worry about?