ATC 3-Wheelers Discussions on ATC 3-Wheelers.

no gas

Thread Tools
 
Search this Thread
 
  #1  
Old 01-21-2004, 11:02 PM
sweet's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2004
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default no gas

i have a 83 250r air ccoled.i just put in a new piston after it has been sitting for 6 years.i cranked it up and it ran for about 15-20min and died.i have good spark but noticed that the spark plug is dry .i cleaned the carb twice and still have a dry plug.has anyone had this problem?can anyone help?
 
  #2  
Old 01-22-2004, 12:32 AM
Bulldog250R's Avatar
Trailblazer
Join Date: Oct 2003
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Default no gas

clogged pickup in the tank? clogged petcock? take the fuel line off the carb and turn petcock on to see if getting fuel to carb, the look at clogged jets, etc in the carb or sticking choke, needle valve etc. i had some junk stuck in the pickup tube that restricted fuel flow. cheers!

edit: check carb float level too- i put the float back in wrong after cleaning and no gas...
 
  #3  
Old 01-22-2004, 07:27 PM
sweet's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2004
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default no gas

update i put in anew plug and had to push start. runs good but after its shut off and left for over 2min it has to be pushed again. this morning i rechecked everything on the tank and carb.?????
 
  #4  
Old 01-22-2004, 10:46 PM
haywoodjalikme's Avatar
Pro Rider
Join Date: May 2003
Posts: 339
Likes: 0
Received 1 Like on 1 Post
Default no gas

How long does it run for til it dies? Check the vent hose on the gas cap, don't laugh if it pulled it won't run for long.
 
  #5  
Old 01-23-2004, 07:36 PM
sweet's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2004
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default no gas

UPDATE#2 I CALLED MY local honda dealer and got the right rotio for gas mix (32:1).went out 4 test run and muffler fell off.now its like new. starts on the first kick (clogged exhaust pipe)i guess it pays not to tighten bolt on a test run after repair
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:50 AM.