I know that this has been asked already, but does anyone know a good source to rebuild the swingarm end of the swingarm. I need the bearings and I guess what ever else I can get. I already rebuilt the axle end. This thing is squeaking pretty bad. Please help me.

Thanks

 

pivot works

they have a compleat kit it has the seals teh covers the bearings.

it is a good price to.

go to ebay and look to

 

Thanks for the reply Carlw, I have checked their site before and I checked again, but nothing for the 83-84 ATC 250R. It is real hard to find these bearing for the 83-84 swing arms as they are not the same as the 85-86. Once again thank you.

 

Have you checked with honda? I got a caliper rebuild kit last year for my 83 250r from honda. Even had it overnighted cause we were leaving to go to the dunes.

 

I am going to pull the part numbers off of my parts book and take them to my local Honda Dealer and see if he can get them. Good thing about going thru them is that they do not charge shipping. Thanks for the help!!!

 

Try Here or this Place

 

Well, finally got the bearings in the mail yesterday from Service Honda for 37 dollars a piece. Local Honda dealer wanted over 53 dollars a piece for them. Took of the swingarm over the weekend and had the bushings and bearings pressed out at work, and now the swing arm is being powder coated as I write this. I have a good friend who has started his own powder coating and polishing shop up so hopefully the R will get a new life in the future. thanks for all the help.

 

The swingarm turned out real good IMO. He used a near chrome powder coat and we got the new bearings and old bushings pressed in no problem. I think I will start tearing this thing down slowly over the next few months and get all the parts repowder coated and tear down the motor completely.

Here are a couple of pics:

Swingarm 1
Swingarm 2