1983 ATC 250r chain Help
#1
#2
1983 ATC 250r chain Help
Ebay for the tools. I have seen them on there. I have the same ATC as you and I am almost done w/ my resto.!!! Can't wait!! To tighten the chain is very easy. Loosen the 2 allen bolts on the rear of the swingarm. Once that is done there is a large washer looking thing between the swingarm and rear sprocket that has notches cut into it. Since you don't have the spanner wrench I used to use(when I had my 200X) a long screwdriver or something of that nature to stick in those notches. Now you wanna make that turn by hitting your screwdriver down towards the ground. So if your facing say the passenger side of your atc looking at the rear sprocket the chain adjuster should move counterclockwise. Hope this helps. Good luck
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)