Also what was your 60 foot time?

 

6.68 tonight @ 94.6 mph. I'll try to post the slip in the morning. Ran out of gear with 17/40. I didn't have an 18 tooth for the front, only a 38 for the rear, and it didn't work very well. The masterlink came apart and threw the chain. (I don't recommend running a 38 with the stock sprocket hub.)

End result was cosmetic damage to the lower part of the case. I'm going to have to get that 18 front and hopefully in the next couple weeks see what it'll do. Also thinking about possibly swapping my 2-5 override for a 1-5 this winter.

 

good time!! 6.68- 94 mph didn't match up at first but then i see its in the dirt!! lot better 60ft time than asphalt you would need a lot more speed to get a time like that on pavment i know guys running 100mph and only going 6.8's check "dynoedge.com" and look at the pics,, street,,,

 

It was on pavement, like I said previously I was running out of gear. I'll post the slip here in a few minutes so it should be up for viewing in a couple hours. This time was run without a wheelie bar, with a 2-5 not a 1-5, and it runs on gas not alky.

I've been waiting for an 18 tooth front which I keep hearing is on back order from Sprocket Specialists. I guess that I'm just going to have to pay the $40-50 for the 18 tooth from Sidewinder. If anyone else knows where to get one, please let me know.

Daren

 

wow thats crazy... we run a 19-40 with 1-5 overide 20" american racers and were getting a sick 1.45, 1.44 60 foot time's and were running 97-.98 mph and only getting a 6.8 and high 6.78's 1/8th et's but were down here in humide Tampa, FL. maybe thats why? your air is thinner? maybe ?? damn good time though nice bike also LMK how to post pics and i'll get some out of my time' sheets and bike... were building a new one with a littened frame and Plus 10" instead of +8 we still can't dump it with low air presure it will stand striaght up! so maybe with +10 we get better time thanks for post

 

P.S thats with a stock 350 crank trued and welded no stroke and no aftermarket cylinders just porting, the new bike were probaily gonna go with a 4mm stroker get er dun!! LOL

 

Ok guys I could not take it he didn't respond so i hade to do it my self>>> i went to a +10 swing arm and changed my gearing around ran a 6.57 and a 6.62 the other night 100- and 99 mph -1.41, 1.43 =60 foots, 4.11,, 4.18= 330 foots and that no joke!!! P>S stock stroke, stock head milled 150 pounds and stock cyl. with major porting also inframe cpi's with 35mm alc carbs!!! now you know ps i'm happy!! LOL

 

where do yu get a wheelie bar from?

 

We have a local racer that builds frames, bars, etc.

 

does he sell them? can he bu ild me one and send it?