ATVConnection.com ATV Enthusiast Community

ATVConnection.com ATV Enthusiast Community (https://atvconnection.com/forums/)
-   CAN-AM (BRP) (https://atvconnection.com/forums/can-am-brp/)
-   -   Which Brand of Jet kit???? (https://atvconnection.com/forums/can-am-brp/131322-brand-jet-kit.html)

CdaleUSA 01-01-2004 04:24 PM

Which Brand of Jet kit????
 
I want to to order a jet kit for my Baja, and I have found 3 options. Dyno-Jet Jet kit on e-bay, and an FMF and K&N jet kit from Rocky Mountain the Dyno Jet kit is about 54 bucks, the FMF is about 53 and the K&N is bout'44 bucks. What do you guys think???

Thanks,
Tom

MrHorsepower 01-01-2004 04:44 PM

Which Brand of Jet kit????
 
Save your money and put in a mikuni #175 main. Set the factory needle to the richest position (bottom groove). Air screw out 3-4 turns. Leave the air box lid on! I have dynoed many combo's and this one works very well.


MrHorsepower

JMAC650 01-01-2004 06:35 PM

Which Brand of Jet kit????
 
MisterHP
What kind of jetting set up for a 2004 Baja with K&N filter & FMF Powercore 4 pipe at sea level?

JMAC650 01-01-2004 06:37 PM

Which Brand of Jet kit????
 
Also mainly dirt trail and track riding.

MrHorsepower 01-01-2004 07:00 PM

Which Brand of Jet kit????
 
JMAC, set it exactly the same.



MrHorsepower

CdaleUSA 01-01-2004 07:41 PM

Which Brand of Jet kit????
 
Thanks MisterHP,

I went to my local dealer, non-bombardier and he claimed that mikuni dose not make a 175 only in 10's (170,180,190) where do I need to look?

Thanks,
Tom

PUSHINTHELIMIT 01-01-2004 08:37 PM

Which Brand of Jet kit????
 
Eric, the mods must just delete ALL PM's sent to you because I sent you one. But I'll post it here for you:

I read in the jet kit thread where you said to use the stock needle in the richest position. Now I have the DJ needle on the leanest position and that's where it runs the best by seat of the pants feel. Should I just leave it alone or used the stock needle like you said? What is the advantage of the stock needle over the DJ needle? I figured it would be the other way around... Thanks.

JMAC650 01-01-2004 09:20 PM

Which Brand of Jet kit????
 

Originally posted by: MisterHP
JMAC, set it exactly the same.



MrHorsepower
Thanks, I'll give it a try. Right now I have it at a 170 main jet and the needle it the stock position with the mixture screw at 3 1/2 turns and it flys.


CdaleUSA 01-01-2004 10:42 PM

Which Brand of Jet kit????
 
Are the jets large round, or large hex type. Or dose it matter, Maybe that is why my local dealer could not find a 175 because he was looking at large hex type??

Thanks,
Tom

PUSHINTHELIMIT 01-01-2004 10:54 PM

Which Brand of Jet kit????
 
Large round. Typical dealer, gotta hold their frickin hand with everything.


All times are GMT -5. The time now is 11:44 AM.


© 2024 MH Sub I, LLC dba Internet Brands