Pictures of AZSAND's EFI system
Mar 18, 2004 | 09:03 PM
#1
Thread Starter
|
Extreme Pro Rider
Joined: Feb 2002
Posts: 3,859
Likes: 1
Pictures of AZSAND's EFI system
They are on my photo page, 5 of them, just click on the little camera to the left.
give it a little while, if the camera aint there its becasue the moderators are still in the approval process, wont take long....
give it a little while, if the camera aint there its becasue the moderators are still in the approval process, wont take long....
Mar 18, 2004 | 09:58 PM
#4
Thread Starter
|
Extreme Pro Rider
Joined: Feb 2002
Posts: 3,859
Likes: 1
Pictures of AZSAND's EFI system
they are ready for sale now, cost is $1295 currently, with hopes of getting it down under a grand if a source is found in the US for the throttle body.
AZ's post about "which carb is better" has all the details.
This setup of AZ's uses dual injectors for his nitro-methane demands, looks like in the pics one is on top and one on the bottom. different mapping is available for alky or gas.
AZ's post about "which carb is better" has all the details.
This setup of AZ's uses dual injectors for his nitro-methane demands, looks like in the pics one is on top and one on the bottom. different mapping is available for alky or gas.
Mar 18, 2004 | 10:51 PM
#7
Extreme Pro Rider
THAT!!!!!Sounds down right sexy!
THAT!!!!!Sounds down right sexy!
Joined: Dec 2001
Posts: 4,389
Likes: 0
Pictures of AZSAND's EFI system
Yes chet there is a return line it gose in the top of my gas cap. And it is dual injector top and bottom. And yes this is a off the shelf ready to ship system there is already several running around out there and no problems reported we all talk quite a bit to make sure we are all learning on the same curve.
Trending Topics
Mar 18, 2004 | 11:08 PM
#8
RIP Dear Friend
Joined: Jul 2001
Posts: 22,930
Likes: 0
Pictures of AZSAND's EFI system
Is this a low or high pressure system?
10--12 psi vrs around 40 psi
It looks slick but I would think the return line would be in the way on top with out seeing it and could one be made to fit in the fuel petcock that would be a inie instead of an outie?
10--12 psi vrs around 40 psi
It looks slick but I would think the return line would be in the way on top with out seeing it and could one be made to fit in the fuel petcock that would be a inie instead of an outie?
Mar 18, 2004 | 11:14 PM
#9
Extreme Pro Rider
THAT!!!!!Sounds down right sexy!
THAT!!!!!Sounds down right sexy!
Joined: Dec 2001
Posts: 4,389
Likes: 0
Pictures of AZSAND's EFI system
It is a big return but i have 3/8 fuel line so my returm is big.And no it actualy looks good. And i don't know that question but i would say above 12. psi. I have a hi presure turbine style pump when it gose empty it sounds like a jet engine[img]i/expressions/face-icon-small-shocked.gif[/img]
Nov 1, 2004 | 10:13 PM
#10
Trailblazer
Joined: Oct 2003
Posts: 71
Likes: 0
Pictures of AZSAND's EFI system
Hightower, I may be able to help you out on the throttle body issue. My buddy owns a very well known Mustang Throttle Body Shop, I could have him take a look and see if he was interested. Let me know. Dave TriSum1@aol.com