ATVConnection.com ATV Enthusiast Community

ATVConnection.com ATV Enthusiast Community (https://atvconnection.com/forums/)
-   CAN-AM (BRP) (https://atvconnection.com/forums/can-am-brp/)
-   -   Video of TVI's KMS Turbo DS (https://atvconnection.com/forums/can-am-brp/179182-video-tvis-kms-turbo-ds.html)

ScoobyDFW Nov 6, 2004 07:48 PM

Video of TVI Turbo DS
 
I don't know if this was previously posted but here it is anyway: http://web.pdx.edu/~war/Untitled.wmv

ScoobyDFW Nov 6, 2004 08:04 PM

Video of TVI Turbo DS
 
Does anyone know what TVI's latest clutch setup is? They must be having clutch issues.

I cannot get more than an hour out of a brand new clutch. This is with a 9 disc setup and PAMI springs. 14 paddle 25" tires with 17/38 gearing launching in 2nd gear at 10,000RPM is hell on clutch.

TheChosenOne Nov 6, 2004 08:06 PM

Video of TVI Turbo DS
 
Damn, I wish I had that problem........LOL

Prozack Nov 6, 2004 08:28 PM

Video of TVI Turbo DS
 
NO JOKE ! i wish I had that problem too !!!
Are you really launching at 10K Scooby??

ANNIHILATER Nov 6, 2004 08:30 PM

Video of TVI Turbo DS
 
I run the 9 disc w/ pami springs also. Do you do a swirl light sanding on the steel plates w/ 600 grit. Thats has worked best for my set up. Ive been running 17-40 w/ hard 2nd gear launches and mines just starting to slip up after 2 months. If the plates are sanded too much they tend to rip off the fiber pieces.
I also run valvoline 20/50 motorcycle oil $2.98 a quart from checker its the best ive used out of many.

Also,JMO- if I skip a few weekends without changeing my oil I think POSSIBLY it could put more ware on the clutch if riding very hard. I usually change my oil after every 2 tanks of gas and it seemed to hold better. Tiny particles of even semi-dirty oil could possibly put more grit in the clutch system causeing the clutch to slick up and ware down too early.

Boomer84 Nov 6, 2004 08:34 PM

Video of TVI Turbo DS
 
Dave,Good to here from you. We run factory clutch with our RED Line springs and Red Line 15-50 oil.6000 RPM 2nd gear start. Tim was starting in 3rd on the run with Banshee!

Eaglecollector Nov 6, 2004 10:04 PM

Video of TVI Turbo DS
 
Very nice.....
Sure hate to see folks ride with no helmet though. At least the Turbo rider knows better.

OregonDunePatrol Nov 6, 2004 10:10 PM

Video of TVI Turbo DS
 
KMS turbo kit right?

DuneMe Nov 6, 2004 11:30 PM

Video of TVI Turbo DS
 

Originally posted by: Eaglecollector
Very nice.....
Sure hate to see folks ride with no helmet though. At least the Turbo rider knows better.
What is it about Banshee Riders? At Sand Mt. you see a lot of them without helmets. . . mostly the Shee riders.


FoxSpirits Nov 7, 2004 12:18 AM

Video of TVI Turbo DS
 

Originally posted by: DuneMe

Originally posted by: Eaglecollector
Very nice.....
Sure hate to see folks ride with no helmet though. At least the Turbo rider knows better.
What is it about Banshee Riders? At Sand Mt. you see a lot of them without helmets. . . mostly the Shee riders.
Most of the people i know that dont know anything about quads,they think that the banshee is supersonic and nothing can touch it.
and naturally they go out and buy one to be billy badass and naturally to be the billy badass they think you should go without a helmet when riding that supersonic banshee.


All times are GMT -5. The time now is 06:10 AM.


© 2026 MH Sub I, LLC dba Internet Brands