little Sahara UT april 9th V-DAY!
#11
Ckedd, I see that you are using the 35 shot of nos, did you go with the bigger dual nozzle, or are you running a seven hole single? I wont be going down that weekend, maybe I'll hook up with you guys later this season in Idaho. Last time I rode that thing it would give my Ds a scare, sounds like its roosts going to scare me now! And one last question, have you tried a really light endload spring in the primary, just wondered from what Ive gathered, it still isnt pulling hard all the way through?
#12
Majorecho, Your welcome on the ride! I have the shifting worked out now and am working on the BOV. We were lucky and did not know it. When I got back to the trailer to load up, I notice that it looked like some gas had run down in the chain area. Well When I got home the fuel pressure reg had blown a metal diaphragm and was running a stream of 100 octane out, not 6” from the drag pipe. WOW. If it had been hot outside we would have seem a fire for sure.
The V runs pretty good for the first 300-400’. It might be note worthy, we’ll see. [img]i/expressions/face-icon-small-wink.gif[/img]
650 VIPER, The 35 hp shot is the duel manifold with a 3 and a 5 hole nozzle in. I got the clutch machined and got better pulling all the way through and 5 mph on the top end. I have been running higher shift out springs and it pulls all the way through now. We will catch up with you sometime at St. Anthony.
[img]i/expressions/face-icon-small-cool.gif[/img]
The V runs pretty good for the first 300-400’. It might be note worthy, we’ll see. [img]i/expressions/face-icon-small-wink.gif[/img]
650 VIPER, The 35 hp shot is the duel manifold with a 3 and a 5 hole nozzle in. I got the clutch machined and got better pulling all the way through and 5 mph on the top end. I have been running higher shift out springs and it pulls all the way through now. We will catch up with you sometime at St. Anthony.
[img]i/expressions/face-icon-small-cool.gif[/img]
#18
OK I got them uploaded finally, I think I even found one where Crackjack is kickin Major's ......[img]i/expressions/face-icon-small-happy.gif[/img]
Check out my profile page in a couple hours, should be approved by then.
Check out my profile page in a couple hours, should be approved by then.
#19
SLC650- you just had to post the one of me getting my butt handed to me by cracker didn't ya?[img]i/expressions/face-icon-small-tongue.gif[/img]
hey Al,
come on up man, long time no see,bring that Mario guy with you and we'll put it to the hill!
hey Al,
come on up man, long time no see,bring that Mario guy with you and we'll put it to the hill!
#20
I am going to try and make this trip with Al. I want a piece of them turbos on the face!!!! I just need to slap another clutch in the Ol- pig for this one. Hope to see Crackerjack and Curtis and all the others....
Al, Tony called today, I tried to get Tony to meet us up there, BUT Guess what?? HES IN LOVE ............................AGAIN!!!!!!!!!!
Curtis, What mph are ya runnin the face at?
Al, Tony called today, I tried to get Tony to meet us up there, BUT Guess what?? HES IN LOVE ............................AGAIN!!!!!!!!!!
Curtis, What mph are ya runnin the face at?


