o thanks

 

I like the power with the stock arm but, I dune more than drag.

 

ok

 

Thumper, I know you were talking about a 730, I start in third with nos, your 730 isnt going to hit that hard. I was just trying to give you some input man.

 

thanks

 

thanks for all u guys help

 

thumper, You can go with any size you want swing arm. I will tell you though with MR. HP's 730 kit at the dunes you will want a longer arm. even with my +4 on the flats I can raise the front tires when ever I want in 1 thru 3 gears. that motor has so much torque that those paddles hook up and you are gone. My riding buddy has a stage II with some head work and climbing the steep dunes gets the front end up. I think you would really like a longer arm. You can also go +3 if the 4 is too much for you. I think my +4 is perfect, I ride in the mountains, sand and anywhere else I want without any problem. If your weight is over 230lbs you might need a stronger spring for your rear shock. Transisions at the dunes and jumping really take its toll on the stock shock. TCS will rebuild, revalue and respring for about $350. Good luck. I will let you know what kind of power that motor makes in a few weeks. I am going to dyno the 730 this week sometime. I will find out the difference between the TVI 720 and the HP 730. (I switched out pistion and cly).

 

Oh, the shock. . . [img]i/expressions/face-icon-small-wink.gif[/img] someone [img]i/expressions/face-icon-small-wink.gif[/img] may have one laying around the garage that has been re-valved and re-sprung for an extended swingarm [img]i/expressions/face-icon-small-wink.gif[/img]

 

do any of u guys have a +4 swing arm that i can buy

 

Om than where can i buy a +4 swing arm