freeplay on carb needle
#2
freeplay on carb needle
If needle assembly is in order, the grey plunger with small spring
holds everything in place. There should be movement up and down,
you should feel light pressure and the needle should return upon release.
If needle is in the 4th or 5th groove from top of needle, there is only a small movement.
holds everything in place. There should be movement up and down,
you should feel light pressure and the needle should return upon release.
If needle is in the 4th or 5th groove from top of needle, there is only a small movement.
#3
freeplay on carb needle
THANKS oldman. do have preasure on needle i think its ok THNKS OLDMAN my bike was junk when ibout it. after i did all of your carb mods its the fastest ds . in ALLIANCE NE. just did the 1/6 of an inch holes on the carb slide i got two holes 1/8 and two 1/ 6 6. i.got 155 main. moose racing air filter. dg muffler . 4200ft elevatio . runs fast but what more got a quadzilla i got to kill
Thread
Thread Starter
Forum
Replies
Last Post
bpegram84
Kids Quads & Other ATV's - Ask an Expert!
0
07-22-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)