Help-carb re jetting
#1
#2
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Usually some small needle nose vise grips work when it gets that bad. Have you tried cutting a slot to fit a flat head screw driver in the screw? Before I attempt to remove any of those OEM carb screws I put the screw driver in the screw and give it a couple of taps with a hammer and that seems to help and using a screw driver that has a black coated tip, seems to help as well.
Once you get them out make sure you replace them with a socket type screw of your liking.
Chris
Once you get them out make sure you replace them with a socket type screw of your liking.
Chris
#4
#5
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
ya i played with my carb for a day or two, try tapping the screw driver with a hammer, be sure you dont break the carb, its like white metal, soft, it breaks easy. Go to your local shop and get the same screw but with a alen/hex head. You will never have that prob again.
They do make them, its sweet if your cleaning you carb alot.
They do make them, its sweet if your cleaning you carb alot.
#7
Trending Topics
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)