CANNIBALvsRAPTORvsDSvsEX - theoretical drag race results!
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
The Cannondale brochure which is based on a SuperFlow dyno (not a DynoJet which yeilds higher numbers)test says the Cannibal has 33 HP, also says the 400ex has 21, Raptor has 28, and DS has 37. It also says the Moto & Blaze are 39HP (results of a pipe and FI mapping) so for all intensive purposes they are "piped" Cannibals, and you can't really "pipe" a Moto or a Blaze
now, lets do a theoretical comparison...
fact: dirtwheels "piped" a Raptor for a 34% increase in HP
fact: piping a Cannibal yeilds an 18% increase in HP
fact: dirtwheels "piped" a 400EX for a 2HP increase
assumption: based on the Bomb forum, a piped DS yeilds 2HP as well
using the SuperFlow dyno numbers...
that would give a "piped" 400EX 23HP & a ptw ratio of 0.0615
&
that would give a "piped" DS650 39HP & a ptw ratio of 0.0821
&
that would give a "piped" Raptor 38HP & a ptw ratio of 0.0952
&
that would give a "piped" Cannibal 39HP & a ptw ratio of 0.1040
__________________________________________________ ________________________
mathmatically, that means all of the following scenerios would be EQUAL in a drag race:
a "piped" 400EX with a 120lb. rider
a "piped" DS650 with a 264lb. rider
a "piped" Raptor with a 324lb. rider
a "piped" Cannibal with a 364lb. rider
just food for thought...
now, lets do a theoretical comparison...
fact: dirtwheels "piped" a Raptor for a 34% increase in HP
fact: piping a Cannibal yeilds an 18% increase in HP
fact: dirtwheels "piped" a 400EX for a 2HP increase
assumption: based on the Bomb forum, a piped DS yeilds 2HP as well
using the SuperFlow dyno numbers...
that would give a "piped" 400EX 23HP & a ptw ratio of 0.0615
&
that would give a "piped" DS650 39HP & a ptw ratio of 0.0821
&
that would give a "piped" Raptor 38HP & a ptw ratio of 0.0952
&
that would give a "piped" Cannibal 39HP & a ptw ratio of 0.1040
__________________________________________________ ________________________
mathmatically, that means all of the following scenerios would be EQUAL in a drag race:
a "piped" 400EX with a 120lb. rider
a "piped" DS650 with a 264lb. rider
a "piped" Raptor with a 324lb. rider
a "piped" Cannibal with a 364lb. rider
just food for thought...
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Does it really matter. My brother and I were thoroughly spanked by a bone stock Cannibal on our piped and jetted Raptors up Utah's Sand Mtn. We watched Ds's get spanked too. We obviously had way more hp, but Raptors and Ds's lack the rpm's to beat C-Dales in this situation so the hp thing is only good for so much. Not bashing just my surprising experience. All things condsidered the guy was lighter on a lighter machine, but not enough to spank us that bad. We all had the same gearing and paddles...
Trending Topics
#9
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
ALLS i know a few months ago i looked on the cannondale site at there ads and they had weight to power charts with the cdale'400ex'raptor and ds. Then they had torque charts same bikes. Top speed charts same bikes. Drag race result charts same wait a minute!!!!! the ds is missing I WONDER WHY???????????
and this was cannondale site!
and this was cannondale site!
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
05-15-2020 08:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)