Our 08 Family Fish Lake ATV Ride
#1
Our 08 Family Fish Lake ATV Ride
Well last weekend we went to Fish Lake again for out Family ATV ride. We had around 250 atv's in all. The Jets went great with the only problem being the left rear tire on my 250 came lose and I lost a lug bolt. Don't know why it came lose it's never done that before! After searching almost every atv tool bag we finally found a 13mm to tighten the remaining lugs back up.
My 9 year old also rolled his 150 over on it's side and bent the handle bars and was shaken up a bit but was not hurt.
Here is our 08 Family ATv ride video:
08 ATV Ride
My 9 year old also rolled his 150 over on it's side and bent the handle bars and was shaken up a bit but was not hurt.
Here is our 08 Family ATv ride video:
08 ATV Ride
#2
#4
Our 08 Family Fish Lake ATV Ride
<div class="FTQUOTE"><begin quote>Originally posted by: outofline
The Jets went great with the only problem being the left rear tire on my 250 came lose and I lost a lug bolt. Don't know why it came lose it's never done that before! </end quote></div>
outofline - My lugs kept loosening up also (primarily when newish and primarily the rear wheels). I went out and bought a box of 50 nuts (10mm x 1.25) at an industrial hardware supply store and put 'back-up nuts' and washers on the rear (inward) side of each of the rear wheels (couldn't do the front - kind of impossible to get in there). On the rear wheels - the threaded lug bolts stick thru the hub by 1/2" to 5/8" - just put on a flat washer and tighten the nuts down on the protruding lug bolt ends - and NEVER have those lugs EVER loosen up again !!!
The Jets went great with the only problem being the left rear tire on my 250 came lose and I lost a lug bolt. Don't know why it came lose it's never done that before! </end quote></div>
outofline - My lugs kept loosening up also (primarily when newish and primarily the rear wheels). I went out and bought a box of 50 nuts (10mm x 1.25) at an industrial hardware supply store and put 'back-up nuts' and washers on the rear (inward) side of each of the rear wheels (couldn't do the front - kind of impossible to get in there). On the rear wheels - the threaded lug bolts stick thru the hub by 1/2" to 5/8" - just put on a flat washer and tighten the nuts down on the protruding lug bolt ends - and NEVER have those lugs EVER loosen up again !!!
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)