welp only had it for a lil bit but its just not what i am wanting.. 06 frame trx450r has lager +2 or +3 front a-arms. front elka shocks, rear RPM axle, brake antifade lock nut, propegs HOUSER steering stem, swing arm and a-arms powdered silvervein, maier front and rear plastic rear's cut, to clear kick starter... only have sand tires for it right now. thats the way i got it.

the engine:,,.

the motor is out of a CRF 450 the engine as far as i know has a 490 wiseco cylinder, piston in it its ported by rj racing bigger valves, crower 3 cam? falicon crank ( stroker?) has about 4 hours on it now. runs straight race fuel. used the crf ignition with the 11,500 rpm limit, and small flywheel has the stock 450 carb on it when i got it the motor was not in the frame right i remade all the motor mounts. the lower motor mounts are the only ones in the frame that were modified, the other 2 can have the stock mounts put back and reinstall a trx motor( if you want) the crf motor is smaller and lighter it reve's farther and really to me the bike is fun to ride but a handfull in tight trails i think for hard mx riding or for fast dunes it would be great,.

i am wanting a LTR 450 stock or minior mods is about what i think i'd like to try next.. OR a 700 raptor would prefer the rappy.

if yoyu like give me a call 620 259 6178 OR 620 802 8807 i can email pics. may consider a part out if some one wants the motor first.. will sell motor complete with the wiring harness and the motor mounts to fit in a trx frame, the mounts bolt in stock locations. the crf motor can be removed and a trx engine reinstalled.