It is a 91 so that should be fine. I will let you know for sure tomorrow once in pull it apart.

 

Oh, you might want to confirm that. I think you have a Quadrunner, not a quadsport. I've read that the frames were different, but I've never seen one in person, At a minimum, you should measure the width of the swingarm at the mount, and I'll measure my swingarm.

 

Just took mine apart and looked at it. I don't think the one you have will match up to my 91. The rear mounts different.

 

Updated list, with updated prices. I'll listen to offers on any of the parts below.

Blue seat. It's in good shape, but it has two small wear marks at the lip of the seat. $100 shipped

Maier front hood - blue (still in original package): $40



LT230S Answer Roost Boost: $35



LT250S swingarm that has been powdercoated a dark grey, and has new pivot bearings. This swingarm is 1" longer than the LT230S swingarm. $150 (see picture below)

LT230S swingarm (seen in picture above.) It has been repaired once, but it's straight. Needs bearings: $50

LT250S engine mounts: $30 (can be used to mount the LT250S engine into LT230S frame)

DG Muffler and head pipe: $50

The steering stem: $50

The front wheel bearings are new, but have been installed.

axle bearings that haven't been installed.

Parking Brake block-off: $10

LT230S head, cam, Cylinder/jug and piston: $100

The following items I will ship, but the prices do not include shipping.
LT230S bottom end (missing stator cover and left side housing is cracked): $75
LT250S bottom end (missing stator cover, clutch cover and left side housing is busted): $75
LT230S front OE wheels, with old worn out tires: $50
LT230S rear Aftermarket wheels with tires(not sure of manufacturer): $75
Rear Axle, in good shape and is straight: $75

 

Bump.

 

BUMP???? J-m did you bump your head??

 

It's just a reminder to let people know I still have these parts.

 

I can sandblast any of the parts if requested. Except for engine.

Here's the kickstarter after being sandblasted. $20 shipped if anyone wants it. I can powdercoat this for another $10 as long as you pick one of the colors that I already have.

 

I pulled the clutch basket and clutch out of the lt250s engine. This is an upgrade for the lt230s engine. The clutch worked fine before. But it has been sitting for a year.

$40/shipped.

 

Here's a picture if the steering stem.