I need some sort of hydraulic rear brake for my Blaster. Does anyone know of any direct bolt-ons from other machines that will work. I really dont want to spend $350 for a Trenga kit. I have been told that their new generation 3 kit does not work. If anyone has an old generation 2 kit, I would be interested for the right price.

------------------
Jayson Blough '99 Banshee, '97 Warrior, '96 Blaster Yes I like Yamaha

jblough - when i had my blaster i had a first gen. kit from trenga....or atleast i think it was a first gen. anyways in some of the literature with it they said that the caliper, master cyl. and reservoir were all off of a 350x. unfortunately the work of puting hydrolic brakes ona blaster is in the brakets and linkage for the master cyl.
perhaps if u found a junk 350X with rear brakes intact u could oder then neccisary parts from trenga to be able to use then.
dont know if ive actually helped u, but ive told u what i know about em

Guys

there is areally good article on how to fit up a hydraulic rear end on a blaster with plenty of photos etc. Check it out on :http://www.uslink.net/~philzie/bb2.html.

You won't be disappointed, it's a great article.

Kiwi_Craig

Check out my two pages on the subject: and <a href="http://www.angelfire.com/ms/blasterville/brakes.html">How I Built Hydraulic Brakes

In short, the newest genereration Trenga brakes don't work (see page for details), but it's not hard to make a custom rear brake that works well (again, see page).

[This message has been edited by EdSmith (edited 11-01-1999).]

[This message has been edited by EdSmith (edited 11-04-1999).]

the kit is based on a racing go cart break system. the system was ment to stop a 100mph+
go cart.

IF YOU NEED HELP GO TO THIS AMAZING BLASTER SITE IT HAS EVERYTHING!!!!!!!!!!! http//www.blastercentral.com it has rear brake stuff there and lots of others. Even front disc hydros for the blaster you can order brakets of this site and take banshee or warrior discs and put them on the blaster anyways go to this site?