Hey guys What A Arm should I buy for my 250r any help would be great.
Thank you
Spencer

 

I LOVE MY LAEGER. Fit and finish is great. most pros use laeger too. I reccomend them highly.

 

Hey thanks for the info I will most likely go that way.
Spencer

 

My friend just got chrome +3+1 arms for his R. They are Lonestar brand. They are really nice. I think either Lonestar or Laeger's would be your best bet. I have heard that all of the Roll Design products don't mount up too easy. If you can afford it, just get the whole Laeger Pro-Trax front end which includes, a-arms, spindles, tie-rods and ends. That is what Tim Farr uses.

I did see on the KandKatv site that Lonestar is coming out with spindles similar to the Laegers, though, which bolt onto existing LSR arms. The spindles use heim joints, instead of the traditional ball joints.

I feel that you can't go wrong with the LSR or Laeger's.

Hope this info is helpful.

 

Yeah lots of pros and a riders use the "Pro-Trax" steering setup by laeger. It cost $2200 for the whole set from Nac's Racing. The Laeger aarms like i have cost $572. i love them.. Glad i could help.

 

I have Leagers on my Lt and their great!




1991 Lt250r :
Ceet seat cover,DG alloy front bumper,DG alloy rear grabar,DG alloy nerf bars ,Emgo bars,Pro design kill switch,Pual turner pipe,Fatboy silencer,Maier plastic(Looks awsome I put lots of cool stickers on it),Uni air filter,Shockwears,Parking brake block off,RTC clutch lever,Motion pro twist throttle(took a while to get used to!),Leager A arms ,Ohlins front shocks(got them with the quad the look kinda old),Homemade motor skid(from speed limit sign),Turf tammers on back,IPT hole shot up front,And probly other stuff to but I cant think of all of them rite now. Please go to http://www.screaminglt250r.homestead.com