How hard would it be to put the Durablue Eliminator 2+2 Axle on and what do I need to install it? Oh, and would this be a good product... Do I necessarily need to get the one with hubs or what, cause I am confused on what you use from the stock raptor axle with the new one?

 

Chubby...The Eliminator 2+2 is EASY to install. I installed my wifes in about 25 minutes. All you do is remove the wheels and hubs, take off the stock axle nuts(hardest part)and slip the axle off pulling it through the left side of the quad. Installation of new axle is simply reversed. Make sure you READ INSTRUCTIONS!! There is a washer that is NOT used on the Raptor, it is for the Banshee or Blaster. I figured this out on my Rappy. Took me 2 hours before I read the instructions and found out it wasn't needed. The only other parts you use from the stock Rappy is the hubs. Any others questions...let me know!!![img]i/expressions/face-icon-small-cool.gif[/img]