When I had to get it pulled back to the spot I tried to pop the clutch along the way and it did not work

 

Before you beat your brains any further take the center plug out of the stator cover. That is a10mm allen wrench, in there is abolt on the end of the crankshaft. Put your 17mm socket on it and make sure you didn't sieze the engine.

 

I dont know what to do

 

Give me some time I will try that I will let you know how it turns out

 

You can stick a screwdriver in between the two bolts on top of the cillinoid and jump start it untill you get a new one if thats the problem.that was what was wrong with mine. make sure the screwdriver is touching the two bolts though.

 

yeah, what hondaracer said. try to jump start it with a screw driver, that should work.

 

Im not sure where the wire for the neutral light goes in the motor on your bike, but it is probably on the right side of the motor on the bottom.Make sure the wire is pluged into the side of the motor.The neutral wire came unpluged on my 300 fourtrax and it did the same thing.