hi guys, does anyone here know what the displacement is on a stock 250x

 

its 230somethinnnot sure the exact but it is in the 230's

 

its 246 cc's.

 

Yup,
246cc

 

The following specifications were published in Honda's 1991-1992 service manual.

Displacement: 246.4cc
Bore & Stroke: 74mm & 57.3mm
Compression: 9.4±0.2:1 (185 ±14.2psi cold cranking)
Carburetor: 36mm
Lubrication: wet sump, pressurized
Ignition: CDI
Ignition timing: 23°±2°BTDC/3,000±200RPM
Starter: forward kick
Transmission: 5-speed manual clutch, plus reverse
Transmission ratios: primary 2.833 (68/24), 5th 1.178 (33/28), 4th 1.458 (35/24), 3rd 1.857 (39/21), 2nd 2.529 (43/17), 1st 3.692 (48/13), final 2.923 (38/13)
Final Drive: #520 chain, O-ring sealed
Overall Length: 1,720mm (67.7")
Overall Width: 1,105mm (43.5")
Overall Height: 1,085mm (42.7")
Seat Height: 770mm (30.3")
Footpeg Height: 325mm (12.8")
Wheelbase: 1,225mm (48.2")
Ground Clearance: 125mm (4.9")
Dry Weight: 164kg (362 lbs), engine only: 39.2kg (86.4 LB)
Curb Weight: 170kg (375 lbs)
Maximum Weight Capacity: 120kg (270 lbs)
Fuel Tank Capacity: 8.5 liter (2.3 gal) including reserve
Front Wheels: AT22x7-10 aluminum rims with 4 on 144mm bolt pattern
Rear Wheels: AT22x10-9 aluminum rims with 4 on 110mm bolt pattern
Brakes: triple hydraulic disk, single piston caliper designs
Front Suspension Travel: 170mm (6.7"), double wishbone, adjustable preload
Rear Suspension Travel: 200mm (7.9"), decarbon-type damper, adjustable preload
Caster: 8°
Camber: 0°
Trail: 35mm (1.4")
Toe-in: 10mm (0.4")
Turning Radius: 3.2m (10.5')

The displacement is 246.6 cc
Hope this hleps....[img]i/expressions/face-icon-small-cool.gif[/img]

 

cool, thats all i needed thanx guys