my chain is way to loose with a 36 tooth sprocket. so i took out some links. but i took to many out. is there any way to take out just one link? if i cant how am i suppose to get the sprocket to work?

 

If re-adding full links back to your chain is to much, buy a 1/2 link & try that

 

is that the sprocket that is one tooth bigger than stock? if so, i had the same prob. the guy that runs my local shop sold my sprockets and chain to me and said i would not need to take out any links. well, when i put it on, i had my adjustment so that it was all the way tight, and the chain was still saggin. so i took one link out. its all good now. ive got a 14 tooth front and 1 tooth more than stock in the rear sprocket.

i ride a 2000 honda 400EX with maier purple plastic, purple renthal bars, black seat cover,motion pro twist throttle, prm full body skid plate, prm swing arm skid plate, prm front bumper, sunstar sprockets-2teeth lower gearing, 20 inch turf tamers on rear, graydon proline aluminum nerf bars. go to www.angelfire.com/stars/stuff4