Honda Discussions about Honda ATVs.

NO WAY!!!!!

Thread Tools
 
Search this Thread
 
Old Aug 1, 2000 | 02:43 AM
  #1  
TheLaw's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2000
Posts: 71
Likes: 0
Default

well guys, yesterday was the first day at Duhons Mudhole that quads could go in. Its got a 180 ft muddy drag strip with the christmas tree for lights, an obstacle course, and a 5 acre crawfish(crayfish if you a northern boy) pond.
well.... a good friend flipped his Arctic Cat 400 on a ramp built for MX bikes, which had him HIGH, edited by boner, in the air. he got away with ONLY cuts and bruises. the bike has alot of metal damage.
only 3 bikes went in the crawfish pond: Me, honda 450 S with all Highlifter mods and 28 Vampires, and an arctic cat 500 with magnums. we went in 2 at a time, i went in with the 450. i went everywhere he did, and actually went in a truck rut he couldnt make! man i was on a high after that.
we also drag races, and i only beat him 1 time out of about 6, although they were all very close.
they had alot of trucks doing all of that, which we just embarrased those trucks in the mud, and sport quads too. we had lots of fun, just ask BONER, and we will have pictures soon, atleast when BONER gets them on the internet.....yeeee hawwww
 
Reply
Old Aug 1, 2000 | 02:53 AM
  #2  
BONER's Avatar
Pro Rider
Joined: Sep 1999
Posts: 1,724
Likes: 0
Default

Yes, I have the pictures to prove it all. I would have never expected a"LITTLE" 300 to pass where a 450 with 28" Vamps could not. I never new a Locker could do so much. I think with this type of mud The_Law's 27x12x11 Tri Claws in The rear also helped.

On a Sad note the 450 didn't make it threw the day. After trying to pass in the same hole which law easily made it threw( the 450 tried it 5 times before LAW got there and dug it very deep) the 450's rear u-joint blew out. This was mainly cause the Rider(no the owner) was poping the clutch like crazy all day trying to spin those big 28" Vamps better.

Goes to prove that even honda's break.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:20 AM.