airated oil problem for 400ex
#1
My oil got airated after i put the 440 kit and cam and such in.. I was wondering if it could possibly b because of crappy oil or that it was apart so long and the oil hasn't pressureized the air out? I put castrol in it.. They say thats not good.. So im gunna try something better and made for that.. Is it normal for a little bit of bubbles in the oil? Also would this occur if it was over filled? LEmme know anything will help thanks.
#2
I don't think your letting it sit long enough after you turn it off. Your suppose to let it idle for 5 minutes, then shut it off and let it sit for a few minutes, then check the oil. I have noted my oil has bubbles in it if I check the oil right after I turn it off. And yes you shouldn't use automotive oil in your 400ex.
#7
Trending Topics
#8
why what will happen if i over filled it? will that cause it to blow somthing out? what do u think.. i did put alot in my but i filled it to the line when the engine was cold in the canister.. i may have over filled it
#9
When you over fill an engine with oil it allows the crank to dipp way down into the oil splashing it everywhere/airating it. It will hurt the engine to leave your oil like that because you will lose oil psi, and eventually cause major problems. I dont think that your oil is like that because of something being broken. Just double check the level.


