I am running a Delta V-force in my ESR 350 motor but I keep breaking the carbon fiber reeds. Any opinions on a better setup? I saw one called G3 power curve reeds, I've never seen them, also what about a boyesen rad valve, pyramid reed valve, or a stock CR dirt bike setup? any help is appreciated!!

 

I am in the process of rebuilding my 250R with a 265 piston, serious portwork, ESR pipe, 39 Carb, ESR head, etc. I was running stock before, but am now switching to a Rad Valve. From what I've been told the Rad Valve or the ESR set is the way to go. I haven't heard a lot of good things from the V-Force[img]i/expressions/face-icon-small-sad.gif[/img]

 

V-Force are nice set of reeds. GET A reed spacer if they make them for the 250r...which i'm sure they do.

 

ESR but very expensive or go with stock CR250 reed cage. I've used V-force with no issues as well.

 

read about half way down this post some R owners talk about reeds.

http://forums.atvconnection.com/mess...yword1=monster

 

What is the part number on your cage, if it's a V2MO5-CR250 it's the wrong one for a quad. V2R05 is the right one.

 

Call William Holgren at 858-679-3288

Thats 1Dirracing home of the G3"s power curve reeds and valves.

Talk to Bubba297 he is running a set in his 250R and loves them.[img]i/expressions/face-icon-small-smile.gif[/img]