What should i do?
#1
What should i do?
what should i do next? ive got a DG excellerator slip on, k&n(outerwears), shockwears, and an E.H.S. lid. i dont want to spend that much, dont really have the money for a bore. i was thinking a hotcam 1, how much would that cost to be put in, what kind of jetting is needed for the cam. i also was thinking a revbox. anything will help, just looking for suggestions, thanks
#3
What should i do?
Before you get a cam, get a full exhaust. If you get a cam with the stock header, you're not going to get the full potential of the new cam. Also, how about replacing the stock tire's. From my experience with them, the stock wheels are not great and tires are easily punctured, at least on the couple 400's Ive ridden.
#4
#5
#6
What should i do?
Originally posted by: Tyson150
ya i need new tires, what is the biggest size i can get on the stock rims? and how must would it be to install a cam? is it easy? i ride some mud and trails
ya i need new tires, what is the biggest size i can get on the stock rims? and how must would it be to install a cam? is it easy? i ride some mud and trails
#7
What should i do?
Originally posted by: Bing
22" rears 23" fronts would be a good start,,,,,then drop a tooth on the front sprocket,,,and maybe add 2 in the rear
Originally posted by: Tyson150
ya i need new tires, what is the biggest size i can get on the stock rims? and how must would it be to install a cam? is it easy? i ride some mud and trails
ya i need new tires, what is the biggest size i can get on the stock rims? and how must would it be to install a cam? is it easy? i ride some mud and trails