just wanting to know if you have a 300ex can you measure the angle of castor? and measure the angle of the front bolts on the a-arms. how much the top is set back from the front of the bottom a-arm or the degree of a-arms. In trying to figure out the spec. I have a conversion that puts a-arms off a 300ex on my lt80. see my pics. but they run plumb . makes castor to much. making something to off set but dont have a 300ex to measure. thanks for your help.

 

castor angle is 7 degrees - right out of a 300ex manual

 

thank you for your time.