to cam or not to cam?
Apr 24, 2008 | 11:03 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Feb 2008
Posts: 9
Likes: 0
to cam or not to cam?
Hey guys new to fourm. boy theres alot of info here, Got a question, I have a 94 trx300fw as so does a friend of mine who toasted his ride. He said I could have his cam and jet kit. question is what will I get from these mods and will they eventualy toast mine as well? any input would be great!
Apr 24, 2008 | 11:35 PM
#2
The Facility
Joined: Nov 2001
Posts: 4,062
Likes: 1
From: Mississippi
to cam or not to cam?
Welcome to the forum.
Be careful with a cam from a "toasted" engine. It may not be useful at all.
And if you do use his cam, be sure to get the rocker arms from that same engine because once a cam has been "used", you need the rockers that are already "worn" to that cam. Not doing that usually leads to premature failure in a hurry to both.
Be careful with a cam from a "toasted" engine. It may not be useful at all.
And if you do use his cam, be sure to get the rocker arms from that same engine because once a cam has been "used", you need the rockers that are already "worn" to that cam. Not doing that usually leads to premature failure in a hurry to both.