need some help
Jul 30, 2008 | 02:15 AM
#1
Thread Starter
|
Weekend Warrior
Joined: Nov 2007
Posts: 20
Likes: 0
need some help
I have a 2005 rancher 400At. Im puting the top end back on and i dont know the specs or steps to tighten it down. Does anyone have a diagram and or torque specs for tightening the head back down. Thanks for the help.
Jul 30, 2008 | 08:03 AM
#2
Pro Rider
Joined: Jul 2006
Posts: 1,656
Likes: 1
need some help
Apply oil to the cylinder head cap nut threads and
seating surfaces.
Tighten the cap nuts to the specified torque.
TORQUE: 39 Nm (4.0 kgf-m, 29 Ibf-ft)
Tighten the cylinder head mounting bolts securely.
Install the cylinder head cover bolts.
Tighten the cylinder head cover bolts in a crisscross
pattern in 2 - 3 steps. 10 N-m (1.0 kgf-m, 7 Ibfft)
================================================== =======================================
seating surfaces.
Tighten the cap nuts to the specified torque.
TORQUE: 39 Nm (4.0 kgf-m, 29 Ibf-ft)
Tighten the cylinder head mounting bolts securely.
Install the cylinder head cover bolts.
Tighten the cylinder head cover bolts in a crisscross
pattern in 2 - 3 steps. 10 N-m (1.0 kgf-m, 7 Ibfft)
================================================== =======================================