2006 Honda Rincon
06 Rincon starts, but will not idle down. Rode approx 40 miles last Sunday in 20 degree weather, ran fine, problem started when I got back to house. Any help would be greatly appreciated!
|
2006 Honda Rincon
There were threads at rinconriders about the idle air controller hanging up in cold temps, resulting in the machine idling very fast. I think the solution was taking it out and hitting it with some contact cleaner.
|
2006 Honda Rincon
you will need a #20 tamper proof socket to remove the bolt that holds the idle air controller, on top of the throttle body - when you take it out you will probably find it is sooted up- either clean with contact cleaner or replace with new if needed --- part number 16430-HN8-A61 , about $50
I find theses almost a fault with the Rincons - resulting in high revving and crunchy gearchanges |
All times are GMT -5. The time now is 10:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands