Dumb question about ITP rims
#1
Dumb question about ITP rims
Bought my first ATV, 07 Rincon ,its got ITP rims, mudlite tires looks nice.
I wanted to take off the front tires to clean the disk brakes. One side was making some noise.
Is there a special socket to remove the lug nuts. Do you need to remove the center cap?
Thanks
I wanted to take off the front tires to clean the disk brakes. One side was making some noise.
Is there a special socket to remove the lug nuts. Do you need to remove the center cap?
Thanks
#3
On mine, the center cap just sits in there, and can indeed vibrate and sometimes make noise. I put some foam under mine to keep them quiet.
Not knowing exactly what rims you have, it is hard to say what socket you might need. Are they actually 14 mm or is it larger (like 17 mm)? Sometimes with alloy rims where the bolts go deeper into the rims, I find it necessary to use a spark plug socket becasue they are thin walled.
Not knowing exactly what rims you have, it is hard to say what socket you might need. Are they actually 14 mm or is it larger (like 17 mm)? Sometimes with alloy rims where the bolts go deeper into the rims, I find it necessary to use a spark plug socket becasue they are thin walled.
#4
Thread
Thread Starter
Forum
Replies
Last Post
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
09-16-2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)