at wits end .... heres what ive have done so far took flywheel off cleaned replaced stator plate grounded nutral safty switch checked on off switch tested good grounds all good got power to black wire blue wire yellow wire changed cdi box please what did i miss thanks

 

did you check the coil? I haven't done it in a long time, so I don't remember the ohms they are supposed to read, but there should be plenty of info on it out there.

 

thanks i forgot to add that i also changed coil there is not much left to change!!!!thanks john

 

Hi, im having the same sort of thing,with coil signal wire not connected to coil i get 40-60 volts on cranking but as soon as i connect to coil the voltage is very low,if any. Ive have the loom apart today but no joy.if i find the cause ill let you know.maybe its your problem to!!'

 

Did you check ohms of the stator?