|
Trx 200
Not sure of the year but it's shaft drive which I read are early models. I got it as part of a package deal, not familiar with them. It just needs a stator as far as I know but I'm having trouble getting the wood ruff key and flywheel back on. Any tips/ideas? |
If the crankshaft keyway is a bit worn the key has a tendancy to slide out when you shove the flywheel on but if you set it so the key is at a slightly bigger angle than the crank taper, the flywheel should slide over then shove the back end of the key down as it goes. As far as I know, the shaft drive Big Red three wheeler was 84 to 86 and the four wheeler 86 only.
|
I haven't messed with it much yet because I'm still trying to find a stator. I'll let you know how it goes. Thanks for the reply. |
Doubt if you will get one. Is it the exciter or charging coils that have failed? Either way, you can get the coils that have failed re-wound, if new ones are not available.
|
Originally Posted by merryman
(Post 3394236)
Doubt if you will get one. Is it the exciter or charging coils that have failed? Either way, you can get the coils that have failed re-wound, if new ones are not available.
|
| All times are GMT -5. The time now is 07:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands