Honda Discussions about Honda ATVs.

what will it take to get a 400ex to run with a raptor

Old Jul 25, 2001 | 01:55 AM
  #1  
BansheeBoy2001's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2001
Posts: 230
Likes: 0
Default

hey.... i was just wanting to know how to get a 400ex to run with a raptor thats all thank!
 
Reply
Old Jul 25, 2001 | 10:33 AM
  #2  
MIA416EX's Avatar
Pro Rider
Joined: Mar 2001
Posts: 204
Likes: 0
Default

Totally depends on many factors, including:

- riders ability
- riding conditions
- condition of the quads
- how modded the 400EX is

My 416 (see mods below) hangs within 1 quad length of a Raptor (with a pipe & jet kit) in a drag race on pavement up till 5th gear, when the Raptors top speed allowed him to pull away from me. *IF* it had been a stock Raptor, my 416 probably would have been nose to nose with him, up until 5th.

So it takes quite a fair amount of motor mods to a 400EX to keep it in the same ballpark as a Raptor -- in pavement drags. However, on the track and trail, I had no problem keeping up with, and I'm sure I could have easily gotten around the Raptor.

A bigger bore 400EX may do even better against a Raptor...with the right cam, exhaust, etc.

But in general, the Raptor hauls. To bad it isn't as reliable as it is fast.
 
Reply
Old Jul 25, 2001 | 05:27 PM
  #3  
RideRed04's Avatar
Pro Rider
Joined: Dec 2000
Posts: 375
Likes: 0
Default

In one word... money. In more, a big bore kit (get a 416 or 426), high comp piston (I would only go to 10.5:1 so you can say on pump gas), a cam (drop in so you dont have to hard surface your rockers), and a good full exaust. That should get ya ahead nicely.
 
Reply
Old Jul 25, 2001 | 07:19 PM
  #4  
pudjumper's Avatar
Pro Rider
Joined: May 2000
Posts: 623
Likes: 0
Default

A 440 12:1, 450/451 cam, port, DMC, 14/38 will take <u>most</u> Raptors in 300' sand. Top end the Raptor pulls away. $1100-1200 will do mods mentioned.
 
Reply
Old Jul 25, 2001 | 07:19 PM
  #5  
newraptor2000's Avatar
Range Rover
Joined: Nov 2000
Posts: 104
Likes: 0
Default

For all you 400ex riders, there is hope. My buddy's 426ex(EXJumper on this forum) with a 10:1 compression piston, White Brothers Pro Meg exhaust, port and polish(done by himself), plus K and N filter, will hang within a quad length of me from 1st to 5th gear on pavement. That is with a stock Raptor. There is a slight weight difference between us, about 15 lbs, with him being the lighter one. We are waiting for him to purchase a cam to see how much closer it is.
 
Reply
Old Jul 25, 2001 | 11:27 PM
  #6  
Greatone's Avatar
Trailblazer
Joined: May 2001
Posts: 51
Likes: 0
Default

The 400 stock kicks the raptor's but!!!
Im not talking speed!
You want just speed jump from a plane and you will get speed!
the honda will outperform the raptor from a technical stand point handsdown!
Come on raptor lovers start slaming!
But the truth is still the truth!
 
Reply
Old Jul 26, 2001 | 12:23 AM
  #7  
hylton400ex's Avatar
Pro Rider
Joined: Jun 2000
Posts: 268
Likes: 0
Default

We just need to face it, Yamaha, Cdale, Bomb. all have us beat. What little mods they do, we have to counter with MAJOR mods!
 
Reply
Old Jul 26, 2001 | 01:41 AM
  #8  
RdingManiac420's Avatar
Pro Rider
Joined: Feb 2001
Posts: 342
Likes: 0
Default

All you have to do is either race him a few times so the clutch popping blows his tranny or just just nerf his back tire and snap his axle.[img]i/expressions/face-icon-small-happy.gif[/img]
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XxS0ccerstarxX
Honda
0
Sep 24, 2015 11:53 PM
XxS0ccerstarxX
Polaris
1
Sep 24, 2015 05:38 PM
XxS0ccerstarxX
Honda
4
Sep 24, 2015 02:02 PM
black_thunder
ATV Videos
0
Sep 22, 2015 07:59 PM
XxS0ccerstarxX
Honda
2
Sep 22, 2015 02:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:48 AM.