Ya i just rebuilt my 84 200x and since ive done that i had it running but theres a loud ticking noise could you help me out and the clutch really slips alot. All new discs tooo. I have a Shop manual for it but still cant figure the problem. I would appriciate if you would help me out i miss riding.
Thanks!!!!!!



[img]i/expressions/face-icon-small-confused.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img]

 

Not sure about the ticking noise. Is it in the valve train area??

Did you tighten those clutch spring bolts down all the way??
(having the same trouble with my newly replaced clutch in my 350X,
but I didnt know I had to tighten them down untill the springs were completely compressed)

-Matt

 

k i will do that to the clutch. Im not for sure where the ticking noise is comming from im tairing it down this weekend so i will find out. I just replaced the cam,piston,cylinder,valves,all gaskets,clutch discs. But my cousin was working on it and broke one of those studs on the inner plate in the clutch and we had an old motor from an 185 and we put that in it,but the 185 only has four discs and my 200x has five so............ should i go out and price a new one!!!!!

[img]i/expressions/face-icon-small-shocked.gif[/img]

 

I might of found the ticking noise!!! But i dont know if it will make a difference.
i tore the head off and found the intake valve top that holds the valve down was up side down you tell me if it will make a difference please
Thanks